Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
This article features a successfully completed Starlink installation in Wausau, WI, where the team deployed the Starlink system at a warehouse property to serve as the primary internet connection.
For inquiries and request for a quote, call 1-844-799-0258.
Project Overview:
Starlink Business Installation in Wausau, WI
- Location: Wausau, WI
- Property Type: Industrial warehouse
- Roof Type: Flat roof
- Starlink Kit: Performance (Gen2)
- Mount Option: Non-penetrating roof mount with weighted blocks
- Starlink Use: Primary internet connection
- Other customer requirements: LTE router installation
Our Starlink installation SMEs kick-off the processing of the service request by performing the following:
1. Installation Assessment and Planning
An initial offsite assessment was carried out to gather the customer’s requirements for the Starlink installation. Afterward, our team conducted an onsite survey to:
- Using the Starlink App, confirm installation location by running multiple Obstructions Test(s) exactly at the installation location(s); consider height and dish orientation while performing tests.
- Identify existing low-voltage cable pathways; if none were available, coordinate with the customer’s point of contact to establish the most suitable cable entry point and internal termination location.
- Confirm any additional materials, parts, or tools required to complete the installation.
After the site survey, our professional Starlink installers and subject matter experts prepared and submitted a detailed installation proposal for customer review and approval. Once approved and the equipment was ready onsite, the installation schedule was then coordinated with our Starlink installers Wausau, WI.
2. Onsite Starlink Installation in Wausau, WI
The Starlink business installation in Wausau, WI have the following scope of work:
- Starlink Dish Installation – Mount the Starlink Performance dish on the wall using non-penetrating roof mount
- Starlink Cable Run – Route the Starlink cable from the dish through a clean entry point by the office window, then run it through the hallway ceiling down to the MDF room.
- Advanced Power Supply – Install the Starlink Power Supply in the MDF/server room using the mounting kit to keep the setup neat and organized.
- LTE Router Installation – Connect the Ethernet cable from Starlink PSU to the WAN interface of the LTE router. Work with remote IT team for service activation instructions. Connect laptop to perform speed test. The minimum required speeds: 40 Mbps download and 8 Mbps upload.
- Installation Documentation – Take pictures as the proof of project deliverables.
The installation team kick-off the installation by mounting the Starlink dish using non-penetrating roof mount weighted with blocks based on the confirmed location of the Starlink obstructions test.
The Starlink cable ran through the crawlspace, suspended and routed alongside with other network and electrical cabling. From the crawlspace, the cable is passed through the wall or into a cable tray to reach the PSU wall mounting location. The Starlink Power Supply Unit (PSU) was mounted securely with the cable terminated.
The team connected the 30m Ethernet cable from the Starlink PSU to the LTE router and coordinated with the remote IT department for the activation procedures. Once the router was online, a laptop was connected directly to the router to conduct a sample speed test. The results exceeded the benchmark requirement of 40 Mbps download and 8 Mbps upload, delivering 75.44 Mbps download and 18.65 Mbps upload with a latency of 19 ms, confirming a stable and reliable connection.
3. Starlink Optimization and Performance Testing
The installation team conducted additional speed tests to further verify the Starlink connectivity performance, as shown in the image below.
It’s important to note that Starlink may require up to 12 hours to fully optimize its connection. During this initial period, temporary speed fluctuations or brief dropouts may occur. However, once the system stabilizes, it delivers a reliable and high-speed internet connection.
Conclusion
The team successfully executed this Starlink installation in Wausau, WI. They carefully routed cables through the crawlspace, creating a clean indoor pass-through and properly mounting the power supply unit. Final testing confirmed that the system not only met the minimum performance but exceeded the required performance benchmarks, delivering fast, stable, and low-latency connectivity. With this setup, Starlink now equips the warehouse property in Wausau, WI with a reliable primary internet solution that supports business operations and ensures consistent uptime.
Transform your Business Connectivity with Professionally Installed Starlink by ProSat Networks
👉 Contact us at 1-844-799-0258 to request a quote.
We also offer Starlink for Commercial Real Estates
ProSat Networks Serviceable Areas in Wisconsin
In addition to Wausau, WI, we offer Starlink business installation and IT network infrastructure services in nearby towns and cities such as:
- Abbotsford, WI
- Antigo, WI
- Colby, WI
- Edgar, WI
- Kronenwetter, WI
- Maine, WI
- Marathon City, WI
- Medford, WI
- Merrill, WI
- Mosinee, WI
- Rib Mountain, WI
- Rothschild, WI
- Schofield, WI
- Spencer, WI
- Stevens Point, WI
- Stratford, WI
- Weston, WI
- Wisconsin Rapids, WI
and more, just ask
DID YOU KNOW?
Wausau, WI sits along the Wisconsin River and is best known for its world-class whitewater kayaking course, which has hosted national and international competitions. The city is also home to Rib Mountain State Park, featuring one of the oldest rock formations on earth and the Granite Peak Ski Area. It is one of the Midwest’s largest ski resorts.